These days, the use of electronic devices at work and at home has become very common, and in fact, it can be said that most people use these electronic devices for their work. Therefore, in order to connect to electric energy, many wires and cables are needed, all of which are connected to electric energy. Of course, using several wires and cables and connecting them all to electrical energy, in addition to being dangerous for people, it is also considered a risk factor for electrical devices, but there is nothing to worry about, but new and up-to-date equipment has entered the market that has problems from They fix this.
The wire and cable duct is one of the new and advanced equipments, which are very common to use in the electrical energy system these days. Duct has a great effect on organizing and arranging wires and cables, which can be installed on the wall, floor and ceiling of the building. In the following, you will be fully acquainted with the guide for buying wire and cable ducts.
You will get to know the importance of the length of the welding cable, the effective factors in determining the length of the cable and all related matters.
If you are looking for modern ways to transmit fiber optic cables, you should buy fiber microduct because using microducts is the best option. Don’t know what fiber optic microduct is? These products are used for cable transmission and network transmission. These products are produced and used in different sizes and colors. These pipes are from 1 to 24 channels and are produced in different sizes. The most used examples of these products are made in 250, 500 and 1000 meters.
These products are made of a large diameter pipe with several small diameter pipes inside them. Inner tubes are the path of fiber optic cables. This product is produced from polyethylene materials that cannot be decomposed in nature and can be used in various cases. These products are made to provide more protection for fiber optic cables and also provide conditions to expand the cables in the future.
To know the advantages of using optical fiber microduct, it is better to stay with us in this section. The best and most important advantages of using these devices are:
In order to know what fiber optic microduct is, it is better to familiarize yourself with the types of this product. They produce this product in different ways so that they can be used in different cases. The most important types of optical fiber microducts are:
7-channel microduct
They produce this sample of microducts in different sizes. 16×12 mm and 10×14 mm sizes of these products are the most important examples of them.
4-channel microduct
4-channel microducts are also produced in two different sizes: 10×14 mm and 4×7 mm.
After you understand what fiber optic microduct is, it is better to learn more about how to use them. When using these products, you should consider some points, the most important of which are as follows:
The maximum distance between two connection points is 25 meters.
There can be two 90 degree bends or one 180 degree bend in the entire route.
The minimum bending radius for pipes with a diameter less than 5 cm is 6 times the inner diameter.
The bending radius in pipes with a diameter above 5 cm is 10 times the inner diameter.
There should be no kinks in the path.
The tensile force should not exceed the nominal capacity of the fiber.
Concreting on the track is done in one or two stages.
These products should be placed about 2.5 to 7.5 cm higher than the floor of the rooms at the collection point.
last word
Today, many large electrical and telecommunication systems use optical fiber cables. Microducts are used to protect these cables. In addition to being effective in increasing the lifespan of new cables, these products provide conditions so that the electrical or telecommunication system can be expanded in the future by increasing the number of cables. In this article, we tried to answer the question of what is a fiber optic microduct. Thank you very much for being with us until the end and we hope that you have made the most of reading this article.
This product is actually made of a large polyethylene pipe with a large diameter, with a number of small diameter pipes inside it.
Fiber optic cables are placed inside it so that they can be protected in different conditions. This product acts as a protector, and on the other hand, with their help, the cables can be increased in the future.
In the length of 25 meters, there can be a maximum of two 90 degree curves or one 180 degree curve.
This product should rise between 2.5 and 7.5 cm above the floor of the bedroom at the collection point.
Their diameter can be 60 mm at most so that we can perform concreting operations on them properly.
When this diameter is less than 5 cm, the bending radius should be 6 times the inner diameter, and when the diameter of the pipe is more than 5 cm, the bending radius should be 10 times the inner diameter.
Contact Information
Company address: Tehran – Kilometer 18 of Fatah Highway – Sazeh Gostar Saipa Industrial Estate – Nagaristan Street – No. 98
02146079801 – 0214749
All material and intellectual rights of this site belong to: Alborz Polymer
