These days, the use of electronic devices at work and at home has become very common, and in fact, it can be said that most people use these electronic devices for their work. Therefore, in order to connect to electric energy, many wires and cables are needed, all of which are connected to electric energy. Of course, using several wires and cables and connecting them all to electrical energy, in addition to being dangerous for people, it is also considered a risk factor for electrical devices, but there is nothing to worry about, but new and up-to-date equipment has entered the market that has problems from They fix this. The wire and cable duct is one of the new and advanced equipments, which have become very common to use in the electrical energy system these days. Duct has a great effect on organizing and arranging wires and cables, which can be installed on the wall, floor and ceiling of the building. In the following, you will be fully acquainted with the guide for buying wire and cable ducts.
You will get to know the importance of the length of the welding cable, the effective factors in determining the length of the cable and all related matters.
What are the characteristics of fiber optic microduct?
If you are looking for modern ways to transmit fiber optic cables, you should buy fiber microduct because using microducts is the best option. Don’t know what fiber optic microduct is? These products are used for cable transmission and network transmission. These products are produced and used in different sizes and colors. These pipes are from 1 to 24 channels and are produced in different sizes. The most used examples of these products are made in 250, 500 and 1000 meters.
These products are made of a large diameter pipe with several small diameter pipes inside them. Inner tubes are the path of fiber optic cables. This product is produced from polyethylene materials that cannot be decomposed in nature and can be used in various cases. These products are made to provide more protection for fiber optic cables and also provide conditions to expand the cables in the future.
Advantages of using fiber optic microduct
To know the advantages of using optical fiber microduct, it is better to stay with us in this section. The best and most important advantages of using these devices are:
Flexibility in network design
Easy branching
Network upgrade speed in the future
Speed in cabling
Speed up maintenance
Increasing network capacity at the lowest cost
Minimum cost required to install microduct
Reducing the cost of excavation
Reducing the cost of projects
Solt injection in the duct network
Variety in size and capacity
High strength against pressure
Advantages of using fiber optic microduct
Types of optical fiber microducts
In order to know what fiber optic microduct is, it is better to familiarize yourself with the types of this product. They produce this product in different ways so that they can be used in different cases. The most important types of optical fiber microducts are:
7-channel microduct
They produce this sample of microducts in different sizes. The sizes of 16×12 mm and 14×10 mm of these products are the most important examples of them.
4-channel microduct
4-channel microducts are also produced in two different sizes: 10 x 14 mm and 4 x 7 mm.
Important points in using fiber optic microduct
After you understand what fiber optic microducts are, now it is better to learn more about how to use them. When using these products, you should consider some points, the most important of which are as follows:
The maximum distance between two connection points is 25 meters.
There can be two 90 degree bends or one 180 degree bend in the entire route.
The minimum bending radius for pipes with a diameter less than 5 cm is 6 times the inner diameter.
The bending radius in pipes with a diameter above 5 cm is 10 times the inner diameter.
There should not be any kinks in the path.
The tensile force should not exceed the nominal capacity of the fiber.
Concreting on the track is done in one or two stages.
These products should be placed about 2.5 to 7.5 cm higher than the floors of the rooms at the collection point.
Important points in using fiber optic microduct
last word
Nowadays, fiber optic cables are used in many large electrical and telecommunication systems. Microducts are used to protect these cables. In addition to being effective in increasing the lifespan of new cables, these products provide conditions so that in the future, the electrical or telecommunication system can be expanded by increasing the number of cables. In this article, we tried to answer the question of what is a fiber optic microduct. Thank you very much for being with us until the end and we hope that you have made the most of reading this article.
This product is actually made of a large polyethylene pipe with a large diameter, which contains a number of small diameter pipes.
Fiber optic cables are placed inside it so that they can be protected in different conditions. This product acts as a protector, and on the other hand, with their help, the cables can be increased in the future.
In the length of 25 meters, there can be a maximum of two 90 degree curves or one 180 degree curve.
This product should rise between 2.5 and 7.5 cm above the floor of the bedroom at the collection point.
Their diameter can be maximum 60 mm so that we can perform concreting operation on them properly.
When this diameter is less than 5 cm, the bending radius should be 6 times the inner diameter, and when the diameter of the pipe is more than 5 cm, the bending radius should be 10 times the inner diameter.
اطلاعات تماس
آدرس شرکت : تهران – کیلومتر 18 بزرگراه فتح – شهرک صنعتی سازه گستر سایپا – خیابان نگارستان – پلاک 98
شماره تماس : 02146079801 – 0214749
کلیه حقوق مادی و معنوی این سایت متعلق است به: البرز پلیمر
